Tent Stove Flashing Jack Kit High Temp Silicone Pipe Boot Flashing Roof Flue Kit 1. Product Size: Fits pipes with outside pipe diameter 4.5cm to 10cm, if more than 4.5cm, you will need to cut your own rings. Please confirm the size of the chimney pipe base before purchasing. 2. High Temperature Resistant: The tent flue flashing kit is made of heat resistant silicone and stainless steel. Maximum tolerance 280℃. Silicone has good temperature resistance and flexible, allowing expansion, contraction and pipeline vibration, not easy to be damaged or deformed. 3. Protect Your Tent: The tent stove flashing kit ideal for use with 3 wall pipe sections to prevent hot chimney pipes from directly contacting your tent or shelter and provide a tight seal around the chimney pipe at the exit point, which can protect the tent. 4. Easy to Install: First customize the right size with scissors,cut the corresponding chimney pipe, and then unscrew the screws and nuts on the base to fix it at the place where it needs to be installed for simple installation and disassembly. 5. Wide Application: Thick folds and stainless steel rings at the bottom allow them to fit any roof pitch or metal profile. This tent stove flashing is suitable for multiple occasions and can be used with bell tents, tents, yurts, cabins, sheds, boats, houseboats, summer houses, workshops, garages and anything else that requires a flue outlet. Specification: Item Type: Tent Stove Jack Kit Material: Stainless Steel, Silicone Weight: Approx. 405.00g / 14.29oz Heat Resistant Temperature: 280°C Suitable for Chimney: 4.5-10cm / 1.8-3.9in (May Need To Trim The Rings If Over 4.5cm) Product Diameter: 16cm / 6.3in Package List: 1 x Tent Stove Flashing 1 x Wrench