A. Name: Electronic drain valve B. Model: 507292 C. Indicator lamp: LED indicating on/off D. Voltage range: +/-10% E. Protection grade: IP65 F. Insulation: class H G. Maximum working pressure: 1.6Mpa H. Maximum temperature: 90 Celsius I. Ambient temperature: -40 Celsius to 60 Celsius J. The largest current consumption: 4mA K. Supply voltage: 24-240V AC/DC 50/60Hz L. Discharge time (ON): 0.5--10 seconds M. Time interval (OFF): 0.5--45 minutes N. Widely used in filters, separators, dryers, gas tank, drip legs and other compressed system components O. Clean the compressed system before installation. P. Note the direction when installing the valve: outlet do not use a hose that is not against impact. Q. Supply voltage should match the drain valve voltage: the positive pole must be connected to connector "1" when using DC. R. When leaving the factory, the drain valve has connected cable; brown is fiery L, blue is zero line N, yellow-green is safety ground wire GND. S. Tighten the long screw on the terminal box to prevent water from burning. T. Warning: When installing the electronic drain valve, ensure that: Compressed air has been emptied (under zero pressure); The power supply has been switched off. U. Colour: Gold + black V. Material: metal W. Size: flow aperture: 5 mm; In/out port size: 1/2 inch X. Package Contents: 1 x Electronic drain valve Y. Only the above package content is included; other products are not included. Z. Note: Light and different displays may cause the color of the item in the picture to differ slightly from the real thing. The measurement allowed error is +/- 1-3cm.