PROGRAMMER TIMER SWITCH 12V AC/DC Symbol 40408 Digital timer - 12V AC/DC timer The 12V AC/DC digital timer controller is widely used to control LED lighting or other devices that require a specific working time or selected hours of switching on and off, e.g. air conditioners, light advertising, electric cookers, garden sprayer, transmitting and receiving devices, machines, etc. It allows you to program the operation for 7 days of the week. The controller has 16 programs and its programming is very simple and intuitive. Each of the available programs can be set independently on which days the program should be active. In addition, several different programs can be set for the desired day or days. The controller has many different configuration options and, if necessary, you can switch to manual control with the MANUAL button. The lit red diode indicates the operating status of the relay being switched on (control output circuit) Basic Features: Ideal for home, workshop and office use where low voltage control is required. Advanced pre-programmed presets for different days of the week Output load up to 3500W / 16A Built-in rechargeable battery for memory backup after power failure Repeatability of programs with the possibility of setting 16 on / off Ability to manually turn on / off the device Detailed programming instructions in POLISH Specification: Model Cn101A Power supply 12V AC / DC (The tolerance range for stabilized DC voltage is from 12V to max. 17V) Number of controlled circuits 1 NO contact Switching on / off 16 on / 16 off Max power 3600VA (max) Electrical connection: 4 M6.3mm connectors Time limit 1 min ~ 168 hours The battery lasts ≥ 15 days The minimum time interval is 1 minute Contact load 16A (8) A 220-240V AC Relative humidity 35-85% RH Working temperature 10-55°C Dimensions: 60x60x32 mm