Universal Ceiling Fan Lamp Remote Control Kit AC 220V Timing Setting Switch Adjuste Wind Speed Transmitter Receiver Cautions:_x000D_ When the new device can't be remote controlled, Please check to see whether the bar codes in emitter and receiver are consistent, whether the indicator light on the emitter is working, whether the cable of receiver is connected properly and whether the buzzer beeps once when Power is on._x000D_ When the receiver can't be controller by emitter, please checking to see whether the battery normally and whether the Power is enough, Please replace battery in time when it is out of power. Insensitive remote controlling probably because of interfering environment and the low battery._x000D_ Please remove battery when it isn't in used for a long time. Please wiring properly in accordance with parameters on labels. Otherwise it will directly shorten life of this device or cause malfunction immediately. The antenna mustn't connect with other wires._x000D_ When these is a code switch on fan, please turn the fan to the highest gear before remote controlling. The receiver beeps when you click the remote. It might bother some people. Please make sure there are enough space in the canopy of the fan or the receiver has to be fit beside. Operating Voltage: AC 90-220V_x000D_ Working Frequency: 50-60Hz_x000D_ Remote Control Distance: More than 20 meters_x000D_ Support Encoding: 1527 learning code_x000D_ Operating Mode:1527 remote control_x000D_ Loading Power:_x000D_ Ceiling Fan: Max.300W_x000D_ Incandescent Lamp: Max.1000W_x000D_ LED /Energy saving lamp: Max. 200W_x000D_ LED light / energy saving lamp: Max 200W_x000D_ Please don't over loading!_x000D_ Remote control battery: 2 AAA battery needed (Not Include)_x000D_ Type: 220V_x000D_ Colour: white + black_x000D_ Material: plastic Package Contents:_x000D_ 1 * Controller_x000D_ 1 * Remote control_x000D_ 1 * Wall seat Only the above package content, other products are not included._x000D_ Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_