CP2112 highly integrated USB to SMBus bridge controller integrates a USB 2.0 full-speed function controller, USB transceiver, oscillator, and 8 GPIO pins. Via a simple GUI-based configurator, all customization and configuration options can be selected, eliminating the need to develop complex firmware for standard HID class devices. Supplied with software and drivers. The CP2112 device enables fast USB connectivity with minimal development effort. 1. USB bus powered: 4.0 to 5.25V 2. Self-powered: 3.0 to 3.6V, I/O voltage: 1.8V to 3.6V 3. Operating temperature range: -40°C to 85°C 4. On-chip reset circuit and on-chip voltage regulator: 3.45V output 5. Complies with USB specification 2.0, full speed (12 Mbps) 6. Supports USB suspend state via SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8. 512-byte SMBus data buffer, configurable clock speed and device address (7-bit value) 9. Support for Windows and Linux HID to SMBus library for rapid application development, open access interface specification 10. 8 GPIOs configurable as input/output and open-drain/push-pull for external devices Configurable clock output from 48MHz to 94kHz, read/write SMBus device with LED toggle 11. Application areas: portable controller, USB dongle, data recording Material: Plastic + Metal Color: As shown in picture Package Contents: 1 x Module 2 x Row pins Only the above package content is included; other items are not part of the sale. Note: Light reflection and different display settings may cause slight color differences between the image and the actual item. Measurement error allowed within +/- 1-3 cm.