Wind Turbine Charge Controller Waterproof Solar Wind Hybrid Generator Controller with LED Indicator 1000W Item Type: Wind Turbine Charge Controller Material: Aluminium alloy Model: FW12 24 Rated Battery Voltage: 12V 24V Rated Capacity of Wind Turbine: 1000W Wind Turbine Braking Voltage: 15 30V Wind Turbine Recovery Voltage: 13.5V 27V Static Power Consumption: ≤15MA Waterproof Level: IP67 Display Mode: LED ( light emitting diode ) Operating Temperature Range: -35-75℃ Function Description: 1. This controller can control the wind turbine to charge the battery automatically. When the battery is fully charged, the wind turbine is automatically controlled by the internal circuit to brake the wind turbine. When the battery voltage drops to the recovery voltage, the wind turbine resumes charging the battery, thus protecting the wind turbine and the battery. 2. The modular design with independent intellectual property rights makes the performance of the whole system guaranteed to the maximum. The rectifier and brake circuit part of this controller adopts the integrated module designed by our company, which is further than the traditional design in terms of heat dissipation, and reliability. 3. Full waterproof protection. The controller is fully sealed and waterproof, with a protection level of IP67 or above, so that it can be used normally for a long time even if it is placed in water, and its stability and reliability are greatly improved.